Arduino用二氧化碳模块。 0~2000PPM二氧化碳,检测器模块 远大新风机使用模块。有代码和库文件!轻松使用。Arduino仅需2行代码搞定。GE出品,与瑞典模块精准度一致(空气果内置的模块)。均为+-75ppm。可以用于家庭检测,室内种植大棚,发酵处理的等项目场合。 红外光学原理,比敏感体化学材料更具气体选择性! 简单易用适合创客玩家自己用Arduino读取数据,下面附代码,可以参考。 /* Copyright (c) 2014 Brian Manley Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include "SoftwareSerial.h" #include T6603 sensor; void setup() { Serial.begin(19200); sensor.begin(10, 11); } void loop() { Serial.println(sensor.get_co2()); delay(2000); } 主要技术参数: 供电:5VDC 测量范围:0-2000ppm 数字输出:UART@19200BAND 测量精度:±70ppm 温漂:0.5%FS/℃ 稳定性:ABClogic将使得 模块达到完全精确。当ABC logic被使能的时候,只要传感器在每21天内至少有3次可以检测到参考CO2浓度值(400ppm CO2浓度)即可,而该参考CO2浓度值是可以检测到的较低值。 非线性:小于2%FS T90时间:小于3分钟 外型尺寸:65mm*60mm*15.24mm 接口连接:JST B5B-EH-A(LF)(SN) 安装定位孔:该传感器 模块有4个安装定位孔,以配合标准电路板锁定孔(孔径:4mm(+0.2,-0.0mm) 安装配合孔径:5.2mm) 优势 u 对湿度低依赖性 u 15年**命 u 低成本,低能耗 u 充分的技术支持